90512 tkim/71311am tkim tc-00002627 no.8936-1/7 http://onsemi.com semiconductor components industries, llc, 2013 august, 2013 SMA3117 mmic ampli ler, 5v, 22.7ma, 0.1 to 3ghz, mcph6 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. features ? high gain : gp=33.5db typ. @2.2ghz ? wideband response : fu=3.0ghz ? low current : i cc =22.7ma typ. ? high output power : po(1db)=5.7dbm ? port impedance : input/output 50 ? halogen free compliance speci cations absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit supply voltage v cc 6v circuit current i cc 40 ma allowable power dissipation p d 280 mw operating temperature topr --40 to +85 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7022a-018 ordering number : en8936a product & package information ? package : mcph6 ? jeita, jedec : sc-88, sc-70-6, sot-363 ? minimum packing quantity : 3,000 pcs./reel packing type : tl marking tl 1 : vcc 2 : gnd 3 : out 4 : gnd 5 : gnd 6 : in mcph6 2.0 0.25 1.6 2.1 0.25 0.85 0.3 0.65 0.15 0 to 0.02 0.07 654 123 654 123 SMA3117-tl-h lg lot no. lot no.
SMA3117 no.8936-2/7 recommended operating conditions at ta=25c parameter symbol conditions ratings unit min typ max supply voltage v cc 4.5 5 5.5 v operating ambient temperature topr --40 +25 +85 c electrical characteristics at ta=25c, v cc =5v, zs=z l =50 parameter symbol conditions ratings unit min typ max circuit current i cc 18.5 22.7 28.0 ma power gain gp f=1ghz 29.5 31.2 32.5 db f=2.2ghz 30.5 33.5 35.5 isolation isl f=1ghz 35.0 37.6 db f=2.2ghz 34.0 36.5 input return loss rlin f=1ghz 9.0 11.2 db f=2.2ghz 4.5 6.0 output return loss rlout f=1ghz 11.0 14.3 db f=2.2ghz 12.0 16.3 noise figure nf f=1ghz 4.1 5.0 db f=2.2ghz 3.9 5.0 gain 1db compression output power *1 po(1db) f=1ghz 7.5 9.8 dbm f=2.2ghz 3.7 5.7 upper limit operating frequency *1 fu 3db down below at gain at f=1ghz 3.0 ghz * 1 : on evaluation board note) pay attention to handling since it is liable to be affected by static electricity due to the high frequency process adopt ed. ordering information device package shipping memo SMA3117-tl-h mcph6 3,000pcs./reel pb free and halogen free test circuit 100pf 100pf 1000pf in v cc out 100nh 12 65 3 4 it15580 connect 2, 4 and 5 with gnd.
SMA3117 no.8936-3/7 evaluation board in out c2 l1 c3 v cc c1 symbol value c1, c2 100pf c3 1000pf l1 100nh input return loss, rlin -- db frequency, f -- ghz rlin -- f gp -- f frequency, f -- ghz power gain , gp -- db circuit voltage, v cc -- v circuit current, i cc -- ma i cc -- v cc it16524 0 1234 --25 --30 --10 0 --15 -- 5 --20 it16522 0 0 5 10 15 20 25 30 123 6 5 4 it16523 0 25 30 35 40 1234 5.5v 5.0v 4.5v 5.5v 5.0v 4.5v
SMA3117 no.8936-4/7 isolation, isl -- db output power, pout -- dbm output return loss, rlout -- db frequency, f -- ghz input power, pin -- dbm frequency, f -- ghz rlout -- f isl -- f pout -- pin output power, pout -- dbm input power, pin -- dbm pout -- pin it16527 --40 --30 --20 --10 0 --60 --50 --10 0 10 20 --20 --30 --10 0 10 20 --20 --30 v cc =5v f=1ghz it16525 0 --40 0 --10 --20 --30 --50 1234 it16526 0 1234 it16528 --40 --30 --20 --10 0 --60 --50 v cc =5v f=2.2ghz 5.0v 5.0v 4.5v --25 --30 --10 0 --15 -- 5 --20 5.5v 4.5v 5.5v s parameter (v cc =5v) s11 s22 50 25 10 --10 0 10 --25 --50 --100 --250 100 250 it16529 it1653 0 25 50 50 25 10 --10 0 10 --25 --50 --100 --250 100 250 25 50 2ghz 3ghz 1ghz 3ghz 2ghz 1ghz 250 100 100 250
SMA3117 no.8936-5/7 embossed taping speci cation SMA3117-tl-h
SMA3117 no.8936-6/7 outline drawing land pattern example SMA3117-tl-h mass (g) unit 0.008 * for reference mm unit: mm 0.65 0.65 0.4 2.1 0.6
SMA3117 ps no.8936-7/7 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
